- Engine / equipment
- Hyundai Tucson I (2.0 and 2.7 V6 petrol, 2.0 CRDi)
- Period mentioned
- 2004–2010
- Symptoms
- Front-axle noises and play (worn suspension mounts, drive shafts and steering joints) that fail the roadworthiness test; a weak handbrake.
- Possible cause described
- The TÜV mainly flags the suspension, drive shafts and joints. The timing belt has a short interval: 90,000 km on petrol and 120,000 km on the 2.0 CRDi. There were recalls for a handbrake that could release itself (2005) and for the brake-light switch (from 2006).
- Check for the garage
- Check front-axle play and the boots; check when the belt was changed; ask about campaigns by VIN.
- Cost cited in the source
- No verified estimate; ask the garage for a quote.A rough figure from the original database, not an up-to-date quote.
KNOWN FAULT · Hyundai
Front axle, brakes and timing belt on the first-generation Tucson
Sources are not verified in real time and no entry confirms that your car is affected.
Has this happened to you?
Anonymous answer, no personal data.
Frequently asked questions
How much does it cost to repair this fault?
No verified estimate; ask the garage for a quote.
A rough figure from the original database, not an up-to-date quote.
Calculate estimateHow is it checked?
Check front-axle play and the boots; check when the belt was changed; ask about campaigns by VIN.
What are the symptoms?
Front-axle noises and play (worn suspension mounts, drive shafts and steering joints) that fail the roadworthiness test; a weak handbrake.
Which cars and years does it affect?
- Brands
- Hyundai
- Engine / equipment
- Hyundai Tucson I (2.0 and 2.7 V6 petrol, 2.0 CRDi)
- Period mentioned
- 2004–2010
Taking it to a garage?
Models with this entry
- Hyundai Tucson (I)2004–2010
Other entries for these makes
- Ball joints, drive shafts and all-wheel drive on the Santa Fe IIIHyundai
- Chafing brake pipes, corroding front arms and steering ball joints on the Elantra (2001–2006)Hyundai
- Hyundai wheel, axle and suspension recalls (2010–2024)Hyundai
- Wipers that do not return to their rest position because of a loose motor crank arm nutHyundai
- Shift shock between 1st and 2nd in the 7-speed DCT caused by an input shaft snap ringHyundai
- Connecting-rod bearings on the Theta II 2.0 and 2.4 petrol enginesHyundai · Kia
Something not right on this page?