KNOWN FAULT · Peugeot

Incomplete welds on the e-3008 suspension crossmember

Sources are not verified in real time and no entry confirms that your car is affected.

Engine / equipment: Early Peugeot e-3008 electric cars
Period mentioned: 2024
Symptoms: It does not usually give symptoms before failing; the campaign inspection finds it.
Possible cause described: In May 2024, shortly after reaching dealers, Peugeot recalled almost 500 e-3008 cars because a suspension crossmember could have missing or incomplete welds: the garage inspects it and replaces it if needed. According to L’argus, demonstrator cars were also kept off the road until further notice.
Check for the garage: Check by VIN at a Peugeot dealer whether your e-3008 was in the campaign.
Cost cited in the source: Free under the recall.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

Anonymous answer, no personal data.

How much does it cost to repair this fault?

Free under the recall.

A rough figure from the original database, not an up-to-date quote.

How is it checked?

Check by VIN at a Peugeot dealer whether your e-3008 was in the campaign.

What are the symptoms?

It does not usually give symptoms before failing; the campaign inspection finds it.

Which cars and years does it affect?

Find garages near you and, before you say yes, check whether the quote is reasonable.

Something not right on this page?