TESTIGO'S OWN DATABASE

Faults and recalls.

Sources are not verified in real time and no entry confirms that your car is affected.

Search

BrandSpecific modelFuel type

17 entries · page 1 of 2

Check what each recall covers: market, production period and VIN. Ask the manufacturer whether a repair is outstanding.

Non-compliant engine fuse/relay boxElectrical and electronic systems

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: The engine-bay module can deteriorate and disrupt electrical equipment.
Check for the garage: Confirm the campaign by VIN; check module version and replace it as directed by the campaign.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2008/094: 207 DVSA R/2008/094: 307 DVSA R/2008/094: 407 DVSA R/2008/094: PARTNER DVSA R/2008/199: C2 DVSA R/2008/199: C3 DVSA R/2008/199: C4 DVSA R/2008/199: C6 DVSA R/2008/199: BERLINGO

View full entry

Lights switch off due to incorrect switch detectionElectrical and electronic systems

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: Lighting software can misread the switch position and turn the lights off.
Check for the garage: Check the VIN and update lighting-control software specified in the campaign.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2010/157: 807 DVSA R/2010/157: EXPERT DVSA R/2010/155: C8 DVSA R/2009/113: DISPATCH DVSA R/2010/047: SCUDO

View full entry

Incorrect bonding of rear window to hingesBodywork

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: The glass-to-hinge adhesive bond may fail the required specification.
Check for the garage: Check by VIN; inspect the bond and rebond or replace the glass as appropriate.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2018/358: 107 DVSA R/2018/359: C1

View full entry

Non-compliant 206 wiper mechanismElectrical and electronic systems

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: A manufacturing defect can cause the wiper mechanism to fail.
Check for the garage: Confirm campaign by VIN and replace the affected mechanism.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2008/155: 206

View full entry

Incorrect tightening of 1007 suspensionSuspension and steering

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: Insufficiently tightened front-suspension components can cause noise and affect handling.
Check for the garage: Confirm VIN and correct component tightening as directed by the campaign.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2008/146: 1007

View full entry

e-208 propulsion loss from battery-control calibrationPowertrain and engine management

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: Incorrect traction-battery control calibration can cause propulsion loss while driving.
Check for the garage: Check VIN and update traction-battery control software.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2023/009: 208 ELECTRIC

View full entry

Water ingress in 406 cooling fanElectrical and electronic systems

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: Water ingress can short-circuit the cooling-fan motor and create a fire risk.
Check for the garage: Verify campaign and perform the official remedy for the affected fan.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2003/047: 406

View full entry

607 seat bolster obstructing rear side airbagBrakes and safety

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: An incorrectly made rear seat bolster can hinder side-airbag deployment in a crash.
Check for the garage: Check VIN and rear side-airbag equipment; install modified bolsters.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2006/009: 607

View full entry

Bipper/Nemo rear axle crossmember crackingSuspension and steering

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: Repeated maximum suspension travel can enlarge a crossmember crack until a wheel rubs its wheel arch.
Check for the garage: Confirm VIN; replace rear crossmember and suspension stops as specified by the campaign.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2012/098: BIPPER DVSA R/2012/099: NEMO

View full entry

Wiper motor seized by water ingress and corrosionElectrical and electronic systems

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: A non-compliant breather can admit water, corrode the wiper motor and stop it operating.
Check for the garage: Check VIN and replace the motor and one mechanism rod as directed by the campaign.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2018/113: 4007 DVSA R/2018/114: C-CROSSER

View full entry

Loss of insulation in electric motor control unitPowertrain and engine management

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: Insulation in the motor-control unit base can degrade, producing a warning, limited power or inability to start and charge.
Check for the garage: Confirm campaign VIN and replace the affected MCU.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2015/159: iON DVSA R/2015/160: C-ZERO

View full entry

Faulty internal component in airbag control unitBrakes and safety

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: A damaged internal component may prevent deployment. The C-Elysée DVSA record states no advance warning; for Peugeot 301, ARAE documents possible control-unit damage from a transport impact.
Check for the garage: Check VIN; replace the airbag unit preventively, as specified by the campaign.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2018/128: C-ELYSEE ARAE Madeira: Peugeot 301, 308 II, Partner III — airbags

View full entry

AEB remains disabled due to front-camera softwareBrakes and safety

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: A front-camera software fault may leave AEB disabled in a specific situation. Abarth 500e/Ducato detail a reactivation request within the same driving cycle and a missing icon; Boxer/Relay do not detail the trigger or icon.
Check for the garage: Confirm VIN and update front-camera software.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2025/325: 500e DVSA R/2025/339: BOXER DVSA R/2025/340: RELAY DVSA R/2025/320: DUCATO

View full entry

3008 seat-airbag wiring chafingBrakes and safety

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: The source describes the risk stated under cause; it does not document DTCs or additional advance symptoms.
Possible cause described: The driver-seat loom may wear through friction and cause electrical malfunction or unintended airbag deployment.
Check for the garage: Confirm VIN; reinforce and clamp the loom under the campaign.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2014/035: 3008

View full entry

508 diesel-filter heater overheatingPowertrain and engine management

A recall does not mean your car is affected. Check the market, build date and VIN with the manufacturer.

Engine / equipment: Only configurations, equipment and VINs included in the documented assignments.
Period mentioned: Campaign-specific production period; confirm by VIN.
Symptoms: Difficult/no starting and warning; possible later diesel leakage.
Possible cause described: The heater power connector may overheat and distort the filter cover; air ingress and diesel leakage may follow.
Check for the garage: Confirm VIN and campaign diesel filter; replace heater cover and inspect/replace the connector according to condition.
Cost cited in the source: No verifiable estimate. Confirm campaign eligibility and free repair with the manufacturer by VIN.A rough figure from the original database, not an up-to-date quote.

Sources from the original database

DVSA R/2015/241: 508

View full entry