KNOWN FAULTS · MINI

MINI MINI (R56/R55/R57) Cooper D 1.6 (PSA, hasta 2010) common problems.

2006–2014 · Diesel

Sources are not verified in real time and no entry confirms that your car is affected.

2 known faults with sources

Turbo oil starvation from injector carbonTurbo / injection

Engine / equipment: 1.6 HDi DV6 (Peugeot 207/308/3008/Partner, Citroën C3/C4/Berlingo; same engine as the Ford 1.6 TDCi)
Period mentioned: Approx. 2004–2015
Symptoms: Loud turbo whistle, power loss, blue or black smoke, oil that gets dirty very quickly. Before the failure, often a puffing or ticking from the cylinder head and an exhaust smell from an injector.
Possible cause described: The injector clamp bolts work loose, the gas leak forms carbon that gets into the oil and clogs the mesh filter in the banjo bolt feeding the turbo. The turbo is starved of oil. Replacing only the turbo does not fix it.
Check for the garage: Check injector bolt torque and carbon at their base, the turbo banjo bolt and the sump strainer.
Cost cited in the source: Turbo + full oil system cleaning: approx. €900–2,000 (estimate)A rough figure from the original database, not an up-to-date quote.

Corrupted FRM3 module (lights and windows)Electrical and electronic systems

Engine / equipment: FRM3 footwell module (lights, indicators and windows): 1 Series E81 to E88, 3 Series E90 to E93, X1 E84, Z4 E89, X5 E70, X6 E71 and E72 and MINI R55 to R61
Period mentioned: 2004–2015
Symptoms: After a flat battery, a battery change or disconnection, or a jump start: lights, indicators or windows stop working, side or dipped lights stay on and diagnostics cannot communicate with the module (for example code 00A3C1).
Possible cause described: The module's EEPROM gets corrupted by low or unstable voltage: a flat battery, jump starting, overcharging from a faulty alternator or loose terminals. It is a module software fault, not a wiring fault.
Check for the garage: Check the battery and charging and try communicating with ISTA. If the module does not respond, it can be repaired by rewriting its EEPROM (specialist services or programmers) instead of being replaced, then coded. Use a voltage maintainer when working on the car.
Cost cited in the source: Repair by a specialist service: from about €20–60 plus postage; new module with dealer coding: considerably moreA rough figure from the original database, not an up-to-date quote.