KNOWN FAULTS · Peugeot

Known faults for the Peugeot Partner (II).

2008–2018 · Petrol / Diesel

Sources are not verified in real time and no entry confirms that your car is affected.

3 known faults with sources

Engines: 1.6 VTi (Petrol)

1.4/1.6 VTi chain and ValvetronicTiming / Valvetronic

Engine / equipment: Naturally aspirated 1.4 and 1.6 VTi from the Prince family (EP3/EP6C), including the MINI One and Cooper 1.4/1.6 (N12/N16)
Period mentioned: 2006–2017
Symptoms: Chain rattle on cold starts, unstable idle, stalling and an engine light with variable valve timing codes (P1030, P1062, P101A, P1025).
Possible cause described: The chain stretches and the tensioner fails early, often before 100,000 km. A stretched chain throws the timing out and makes the Valvetronic learning fail, which gets mistaken for a Valvetronic fault.
Check for the garage: Listen to a cold start and check the timing and chain condition before replacing Valvetronic parts or repeating adaptations.
Cost cited in the source: Tensioner and chain: approx. €750–1,700 (converted from dollars)A rough figure from the original database, not an up-to-date quote.

Mileage cited in the database: up to 100,000 km. This is not a maintenance interval and does not predict a failure.

Engines: 1.6 HDi (Diesel)

Turbo oil starvation from injector carbonTurbo / injection

Engine / equipment: 1.6 HDi DV6 (Peugeot 207/308/3008/Partner, Citroën C3/C4/Berlingo; same engine as the Ford 1.6 TDCi)
Period mentioned: Approx. 2004–2015
Symptoms: Loud turbo whistle, power loss, blue or black smoke, oil that gets dirty very quickly. Before the failure, often a puffing or ticking from the cylinder head and an exhaust smell from an injector.
Possible cause described: The injector clamp bolts work loose, the gas leak forms carbon that gets into the oil and clogs the mesh filter in the banjo bolt feeding the turbo. The turbo is starved of oil. Replacing only the turbo does not fix it.
Check for the garage: Check injector bolt torque and carbon at their base, the turbo banjo bolt and the sump strainer.
Cost cited in the source: Turbo + full oil system cleaning: approx. €900–2,000 (estimate)A rough figure from the original database, not an up-to-date quote.

Engines: 1.6 BlueHDi (Diesel)

AdBlue system failure (start countdown)Exhaust and emissions (AdBlue)

Engine / equipment: 1.5 / 1.6 / 2.0 BlueHDi with AdBlue (Peugeot, Citroën, DS, Opel)
Period mentioned: Approx. 2014 onwards
Symptoms: Emission system fault message and a “starting impossible in X km” countdown, AdBlue/UREA warning and engine light.
Possible cause described: Failure of the AdBlue tank pump module (circuit board, pressure sensor or heater) or of the AdBlue injector. The engine does not stop while driving, but once the countdown reaches zero it will not restart.
Check for the garage: Diagnose with Diagbox or equivalent: AdBlue pressure, flow test and tank temperature.
Cost cited in the source: Complete module or tank: approx. €600–1,500 (estimate)A rough figure from the original database, not an up-to-date quote.