Before you buy a used Dacia Dokker.
Taken only from Testigo's sourced sheets. Use it to question the seller and on the test drive: it does not confirm that any particular car is affected.

The essentials.
- 4 documented, sourced faults across its 5 engines.
- 1 of them depends on the equipment or the production date: ask what this car has.
- 1 official recall on record: ask for the chassis number (VIN) and confirm it has been done.
- According to the data we have, the engines with the fewest documented faults are: 1.6 MPI / SCe (Petrol), 1.3 TCe (H5Ht) (Petrol), 1.6 GLP (LPG / CNG).
Typical faults by engine
The period and mileage are those mentioned by each sheet's sources. They are not a maintenance interval and do not predict that any particular car will fail.
All versions
Sheets the catalogue links to all 5 of its engines.
- Coils, 1.2 TCe, sliding door and campaigns on the DokkerKnown weak points
- Period mentioned
- 2012–2021
- Mileage mentioned
- The sheet does not mention a mileage.
Applies if: Weak points of this model from inspections, breakdown statistics and recalls; anything specific to one engine is stated in the sheet.
1.6 MPI / SCe · 1.3 TCe (H5Ht) · 1.6 GLP
1.6 MPI / SCe (Petrol) · 1.3 TCe (H5Ht) (Petrol) · 1.6 GLP (LPG / CNG)
We have no faults specific to this engine, only those common to every version.
1.2 TCe (H5Ft)
Petrol
- Period mentioned
- Approx. 2012–2015
- Mileage mentioned
- The sheet does not mention a mileage.
- Stretched timing chain on the 0.9 and 1.2 TCeTiming system
- Period mentioned
- Approx. 2012–2020
- Mileage mentioned
- The sheet does not mention a mileage.
1.5 dCi / Blue dCi (K9K)
Diesel
- Clogged particulate filter on the 1.5 dCiExhaust and emissions
- Period mentioned
- 2010 onwards
- Mileage mentioned
- The sheet does not mention a mileage.
Which engine has the fewest documented faults?
| Engine | Documented faults | Recalls |
|---|---|---|
| 1.6 MPI / SCePetrolFewest documented | 11 with conditions | 1 |
| 1.2 TCe (H5Ft)Petrol | 31 with conditions | 1 |
| 1.3 TCe (H5Ht)PetrolFewest documented | 11 with conditions | 1 |
| 1.6 GLPLPG / CNGFewest documented | 11 with conditions | 1 |
| 1.5 dCi / Blue dCi (K9K)Diesel | 21 with conditions | 1 |
According to the data we have, the engines with the fewest documented faults are: 1.6 MPI / SCe (Petrol), 1.3 TCe (H5Ht) (Petrol), 1.6 GLP (LPG / CNG).
By fuel type, the one with the fewest documented faults is: LPG / CNG.
We only count the sourced sheets we have. An engine with fewer is not guaranteed to be more reliable: it may have been studied less or sold in smaller numbers.
Official recalls: ask before you pay
A recall existing does not mean this car is affected or that it is still outstanding: it depends on the chassis number, the market and the production date.
- Ask the seller for the chassis number (VIN): it has 17 characters, appears in the car's documents and can usually also be seen at the base of the windscreen.
- Ask an official Dacia dealer, or the brand's official website if it lets you check by chassis number, whether each recall has been done or is still outstanding for that VIN.
- Manufacturer recalls are normally carried out free of charge by the official service network. If one is outstanding, ask for it to be done before you close the sale.
The driver’s airbag may not inflate properly (2018)Airbags and seat belts
How to check it: Check the recall by VIN; replace the driver’s airbag if the recall requires.
View full entryOn the test drive: what to look and listen for
Taken from each sheet's symptoms and checks. You can tick off what you have already looked at: it is saved only in this browser.
0 of 4 checked
Engine
Look out for: Oil needs topping up often; the level can reach the minimum with no warning on the dashboard. In advanced cases, timing noise, loss of power or serious engine damage.
Ask them to check: Measure oil consumption with the dipstick over several thousand km, ask the dealer for a diagnosis and the calibration update, and keep every maintenance invoice to request support.
Timing system
Look out for: Metallic chain rattle, especially when cold or at idle; engine light with a crankshaft–camshaft correlation code; in serious cases the chain jumps and damages the valves.
Ask them to check: With any chain noise or a P0016 code, diagnose straight away: measure the stretch and check the tensioner and guides before the timing jumps. Shorten oil-change intervals.
Exhaust and emissions
Look out for: Particulate-filter or emissions warning, limp mode with loss of power and frequent regenerations.
Ask them to check: Read the soot load with a diagnostic tool, run a forced regeneration at the garage and check the differential-pressure sensors and EGR. Make long road trips now and then.
Known weak points
Look out for: On the 1.6 MPI (also with LPG), coils and coolant leaks from the thermostat housing; some oil loss on the SCe; 1.2 TCe chain and oil consumption; carbon on the TCe engines; a driver-side sliding door that latches poorly; steering-wheel shake above 130 km/h; at the roadworthiness test, suspension, lights, brakes and leaks.
Ask them to check: Check every campaign by VIN; watch the coolant; on the 1.2 TCe, listen to the chain and measure consumption.
OBD codes worth looking for
If they let you read the fault memory with an OBD reader, these are the codes mentioned in this model's sheets:
Sources
Every fact on this page comes from these Testigo sheets and their original sources. Sources are not checked in real time.
More Dacia buying guides
- Dacia Logan MCV (II)2013–2020
- Dacia Logan (II)2012–2020
- Dacia Sandero (II)2012–2020
- Dacia Lodgy2012–2022
- Dacia Duster (I)2010–2017
- Dacia Duster (II)2017–2024
- Dacia Logan (III)2020–2026
- Dacia Sandero (I)2008–2012