Skip to content
Emergency

Before you buy a used Mercedes-Benz Clase B (W246).

2011–2018 · Petrol / Diesel · 3 engines

Taken only from Testigo's sourced sheets. Use it to question the seller and on the test drive: it does not confirm that any particular car is affected.

Mercedes-Benz Clase B (W246), real photo of this generation
M 93 · CC BY-SA 3.0 DE · Wikimedia Commons · Photo source

The essentials.

Typical faults by engine

The period and mileage are those mentioned by each sheet's sources. They are not a maintenance interval and do not predict that any particular car will fail.

B 180 / 200 (M270)

Petrol

B 160 / 180 CDI (1.5, OM607)

Diesel

B 180 / 200 / 220 CDI (2.1, OM651)

Diesel

Which engine has the fewest documented faults?

Documented faults and recalls by engine for the Mercedes-Benz Clase B (W246)
EngineDocumented faults
B 180 / 200 (M270)Petrol1
B 160 / 180 CDI (1.5, OM607)Diesel1
B 180 / 200 / 220 CDI (2.1, OM651)Diesel1

According to the data we have, all its engines have the same number of documented faults.

By fuel type, the one with the fewest documented faults is: Petrol.

We only count the sourced sheets we have. An engine with fewer is not guaranteed to be more reliable: it may have been studied less or sold in smaller numbers.

Official recalls: ask before you pay

We have no official recalls on record for this model. Our list is not complete: ask anyway, with the chassis number.

  1. Ask the seller for the chassis number (VIN): it has 17 characters, appears in the car's documents and can usually also be seen at the base of the windscreen.
  2. Ask an official Mercedes-Benz dealer, or the brand's official website if it lets you check by chassis number, whether each recall has been done or is still outstanding for that VIN.
  3. Manufacturer recalls are normally carried out free of charge by the official service network. If one is outstanding, ask for it to be done before you close the sale.

On the test drive: what to look and listen for

Taken from each sheet's symptoms and checks. You can tick off what you have already looked at: it is saved only in this browser.

0 of 3 checked

Timing / leaks

  • Look out for: Chain rattle on cold starts; engine light with camshaft timing codes (for example P0016 or P001685); oil leaks at the camshaft adjusters; slow coolant loss.

    Ask them to check: Listen to a cold start, read camshaft codes, look for oil on the adjuster magnets and coolant residue at the thermostat. Use Mercedes 229.5 oil.

Injection / EGR / DPF

  • Look out for: Smoke, hesitation or hard starting (injectors); unstable idle, power loss and engine light (EGR); particulate filter warning in town use; oil consumption.

    Ask them to check: Identify the engine (OM607 until 2018, OM608 after), measure injector balance rates, check the EGR and particulate filter status and watch the oil level.

Timing / injection

  • Look out for: Chain rattle on a cold start; on early units, loud injector knocking; coolant loss from the plastic coolant manifold or the EGR cooler.

    Ask them to check: Listen to a cold start, check the dealer's injector campaign history and check the coolant level.

OBD codes worth looking for

If they let you read the fault memory with an OBD reader, these are the codes mentioned in this model's sheets:

P0016

Sources

Every fact on this page comes from these Testigo sheets and their original sources. Sources are not checked in real time.

More Mercedes-Benz buying guides

View the model pageAll buying guides