Before you buy a used Seat Ibiza (6K2).
Taken only from Testigo's sourced sheets. Use it to question the seller and on the test drive: it does not confirm that any particular car is affected.
The essentials.
- 2 documented, sourced faults across its 2 engines.
- That is not much data: if no other faults show up here, it does not mean it has none.
- 1 of them depends on the equipment or the production date: ask what this car has.
- We have no official recalls on record for this model; ask anyway, with the chassis number (VIN).
- According to the data we have, all its engines have the same number of documented faults.
Typical faults by engine
The period and mileage are those mentioned by each sheet's sources. They are not a maintenance interval and do not predict that any particular car will fail.
1.4 / 1.6
Petrol
- Timing jump from wrong tensioner after repairTiming / installation
- Period mentioned
- Only production periods and VINs documented in the application conditions.
- Mileage mentioned
- The sheet does not mention a mileage.
Applies if: Only the 1.4/1.6 petrol sub-configuration whose VIN-based catalogue requires INA 531 0252 30 or 531 0525 30; failure after fitting the wrong tensioner. Validate number and application; not an endemic manufacturing fault.
1.9 SDI-TDI
Diesel
- PD TDI camshaft, injectors and cylinder headInjection / cylinder head
- Period mentioned
- 2000–2010
- Mileage mentioned
- 120,000–200,000 km
Which engine has the fewest documented faults?
| Engine | Documented faults |
|---|---|
| 1.4 / 1.6Petrol | 11 with conditions |
| 1.9 SDI-TDIDiesel | 1 |
According to the data we have, all its engines have the same number of documented faults.
We only count the sourced sheets we have. An engine with fewer is not guaranteed to be more reliable: it may have been studied less or sold in smaller numbers.
Official recalls: ask before you pay
We have no official recalls on record for this model. Our list is not complete: ask anyway, with the chassis number.
- Ask the seller for the chassis number (VIN): it has 17 characters, appears in the car's documents and can usually also be seen at the base of the windscreen.
- Ask an official Seat dealer, or the brand's official website if it lets you check by chassis number, whether each recall has been done or is still outstanding for that VIN.
- Manufacturer recalls are normally carried out free of charge by the official service network. If one is outstanding, ask for it to be done before you close the sale.
On the test drive: what to look and listen for
Taken from each sheet's symptoms and checks. You can tick off what you have already looked at: it is saved only in this browser.
0 of 2 checked
Injection / cylinder head
Look out for: Growing noise from the cylinder head, power loss and rough running (cams and lifters); unstable idle, smoke or hesitation (injectors); on the 16-valve 2.0 TDI, coolant loss with no visible leak from a cracked head.
Ask them to check: Check the oil history (VW 505.01), listen to the head, check injector balance rates with a diagnostic tool and, on the 16-valve 2.0 TDI, read the head part number (03G 103 351) and look for coolant loss.
Timing / installation
Look out for: Belt flutter, jumped teeth and possible engine damage.
Ask them to check: Verify application and stamped number; fit only the specified tensioner.
Sources
Every fact on this page comes from these Testigo sheets and their original sources. Sources are not checked in real time.
More Seat buying guides
- Seat Córdoba (6K2)2000–2002
- Seat Arosa2000–2004
- Seat Toledo II (1M)2000–2004
- Seat León (1M)2000–2005
- Seat Alhambra I2000–2010
- Seat Ibiza (6L)2002–2009
- Seat Córdoba (6L)2002–2009
- Seat Toledo III (5P)2004–2009