Before you buy a used Skoda Fabia III (NJ).
Taken only from Testigo's sourced sheets. Use it to question the seller and on the test drive: it does not confirm that any particular car is affected.
The essentials.
- 4 documented, sourced faults across its 3 engines.
- 3 of them depend on the equipment or the production date: ask what this car has.
- 1 official recall on record: ask for the chassis number (VIN) and confirm it has been done.
- According to the data we have, the engine with the fewest documented faults is the 1.0 MPI (Petrol).
Typical faults by engine
The period and mileage are those mentioned by each sheet's sources. They are not a maintenance interval and do not predict that any particular car will fail.
All versions
Sheets the catalogue links to all 3 of its engines.
- A/C not cooling: N280 valveClimate control
- Period mentioned
- 2006–2026
- Mileage mentioned
- The sheet does not mention a mileage.
Applies if: Only if fitted with the air conditioning system described.
1.0 MPI
Petrol
We have no faults specific to this engine, only those common to every version.
1.0 / 1.2 TSI
Petrol
- Period mentioned
- 2008 onwards
- Mileage mentioned
- The sheet does not mention a mileage.
Applies if: Only if fitted with the 7-speed DQ200 DSG. Confirm the gearbox type.
- Period mentioned
- 2012–2020
- Mileage mentioned
- The sheet does not mention a mileage.
Applies if: Only EA211 1.0, 1.2 and 1.4 TSI/TFSI engines; the 1.5 TSI evo is not documented in this record's sources.
1.4 TDI
Diesel
- PD TDI camshaft, injectors and cylinder headInjection / cylinder head
- Period mentioned
- 2000–2010
- Mileage mentioned
- 120,000–200,000 km
Which engine has the fewest documented faults?
| Engine | Documented faults | Recalls |
|---|---|---|
| 1.0 MPIPetrolFewest documented | 11 with conditions | 1 |
| 1.0 / 1.2 TSIPetrol | 33 with conditions | 0 |
| 1.4 TDIDiesel | 21 with conditions | 0 |
According to the data we have, the engine with the fewest documented faults is the 1.0 MPI (Petrol).
By fuel type, the one with the fewest documented faults is: Diesel.
We only count the sourced sheets we have. An engine with fewer is not guaranteed to be more reliable: it may have been studied less or sold in smaller numbers.
Official recalls: ask before you pay
A recall existing does not mean this car is affected or that it is still outstanding: it depends on the chassis number, the market and the production date.
- Ask the seller for the chassis number (VIN): it has 17 characters, appears in the car's documents and can usually also be seen at the base of the windscreen.
- Ask an official Skoda dealer, or the brand's official website if it lets you check by chassis number, whether each recall has been done or is still outstanding for that VIN.
- Manufacturer recalls are normally carried out free of charge by the official service network. If one is outstanding, ask for it to be done before you close the sale.
Airbag inflator deterioration due to moisturePassive safety
Engines: 1.0 MPI (Petrol)
How to check it: Check VIN; replace the inflator or module specified by the recall.
View full entryOn the test drive: what to look and listen for
Taken from each sheet's symptoms and checks. You can tick off what you have already looked at: it is saved only in this browser.
0 of 4 checked
Injection / cylinder head
Look out for: Growing noise from the cylinder head, power loss and rough running (cams and lifters); unstable idle, smoke or hesitation (injectors); on the 16-valve 2.0 TDI, coolant loss with no visible leak from a cracked head.
Ask them to check: Check the oil history (VW 505.01), listen to the head, check injector balance rates with a diagnostic tool and, on the 16-valve 2.0 TDI, read the head part number (03G 103 351) and look for coolant loss.
Climate control
Look out for: The air does not cool or cools intermittently (for example only at motorway speed), and sometimes the compressor rattles with the A/C on. Codes 01232 (N280 valve), P2612 or 00898.
Ask them to check: Read the codes and N280 control current with VCDS or ODIS, measure its resistance (about 10 ohms) and check the connector and wiring before replacing parts. If the valve or compressor is replaced, the whole circuit must be flushed.
Gearbox
Look out for: Judder or shudder pulling away in 1st/2nd, reverse won't engage, PRNDS letters flashing or a spanner warning, gearbox stuck in one gear (limp mode).
Ask them to check: Read the gearbox module faults with VCDS, OBDeleven or similar and check the mechatronic fuse.
Cooling
Look out for: Coolant level drops slowly with no visible puddle, dried white or pink residue behind the engine, a sweet smell and a low-level warning. If loss continues, it can overheat.
Ask them to check: With the engine cold, monitor the level for several days and look for dried residue around the housing and the coolant pipe under the air box. At a garage: pressure test and check for nearby oil leaks. Replacing pump and housing as one assembly is recommended; do not use stop-leak products. Never open the system hot.
Sources
Every fact on this page comes from these Testigo sheets and their original sources. Sources are not checked in real time.
More Skoda buying guides
- Skoda Citigo2012–2020
- Skoda Octavia III (5E)2012–2020
- Skoda Rapid2012–2019
- Skoda Superb III (3V)2015–2024
- Skoda Kodiaq2016–2024
- Skoda Karoq2017–2026
- Skoda Yeti2009–2017
- Skoda Scala2019–2026