- Engine / equipment
- Hyundai Ioniq 5 (NE) and Ioniq 6 (CE) electric
- Period mentioned
- 2022–2024 Ioniq 5 and 2023–2025 Ioniq 6 (US model years)
- Symptoms
- A vibration noise from the lower cover of the battery, under the car.
- Possible cause described
- The battery lower cover comes loose around the centre mounting bolts. Hyundai replaces those bolts and fits a cup washer to each one (bulletin 26-EV-008H).
- Check for the garage
- Ask an official Hyundai workshop to check whether the battery lower cover is loose and apply bulletin 26-EV-008H.
- Cost cited in the source
- No verified estimate; ask the garage for a quote.A rough figure from the original database, not an up-to-date quote.
KNOWN FAULT · Hyundai
Vibration noise from the battery lower cover (Hyundai Ioniq 5 and Ioniq 6)
Sources are not verified in real time and no entry confirms that your car is affected.
Has this happened to you?
Anonymous answer, no personal data.
Frequently asked questions
How much does it cost to repair this fault?
No verified estimate; ask the garage for a quote.
A rough figure from the original database, not an up-to-date quote.
Calculate estimateHow is it checked?
Ask an official Hyundai workshop to check whether the battery lower cover is loose and apply bulletin 26-EV-008H.
What are the symptoms?
A vibration noise from the lower cover of the battery, under the car.
Which cars and years does it affect?
- Brands
- Hyundai
- Engine / equipment
- Hyundai Ioniq 5 (NE) and Ioniq 6 (CE) electric
- Period mentioned
- 2022–2024 Ioniq 5 and 2023–2025 Ioniq 6 (US model years)
Taking it to a garage?
Models with this entry
- Hyundai Ioniq 52021–2026
- Hyundai Ioniq 62022–2026
Other entries for these makes
- Fuel-cell stack losing power and hydrogen leaks on the NexoHyundai
- Battery fire risk on the Kona Electric: battery replacementHyundai
- Warning light and limited power from a false battery overtemperature when water gets in (Ioniq 5)Hyundai
- Wipers that do not return to their rest position because of a loose motor crank arm nutHyundai
- Shift shock between 1st and 2nd in the 7-speed DCT caused by an input shaft snap ringHyundai
- Connecting-rod bearings on the Theta II 2.0 and 2.4 petrol enginesHyundai · Kia
Something not right on this page?