Skip to content
Emergency

Before you buy a used Toyota Yaris (II).

2005–2011 · Petrol / Diesel · 3 engines

Taken only from Testigo's sourced sheets. Use it to question the seller and on the test drive: it does not confirm that any particular car is affected.

Toyota Yaris (II), real photo of this generation
M 93 · CC BY-SA 3.0 DE · Wikimedia Commons · Photo source

The essentials.

Typical faults by engine

The period and mileage are those mentioned by each sheet's sources. They are not a maintenance interval and do not predict that any particular car will fail.

All versions

Sheets the catalogue links to all 3 of its engines.

  • Period mentioned
    2005–2011
    Mileage mentioned
    The sheet does not mention a mileage.

    Applies if: Weak points of this model from inspections, breakdown statistics and recalls; anything specific to one engine is stated in the sheet.

1.0 / 1.3 / 1.33 VVT-i

Petrol

  • Period mentioned
    Approx. 2005–2011
    Mileage mentioned
    The sheet does not mention a mileage.

    Applies if: Only the 1.0 VVT-i three-cylinder (1KR-FE).

  • Period mentioned
    Approx. 2008–2013
    Mileage mentioned
    What the sheet says: The oil level drops between services (more than half a litre per 1,000 km and up to a litre or more), usually from 150,000–200,000 km; bluish smoke.

    Applies if: Only the 1.33 Dual VVT-i (1NR-FE).

1.8 TS

Petrol

We have no faults specific to this engine, only those common to every version.

1.4 D-4D

Diesel

Which engine has the fewest documented faults?

Documented faults and recalls by engine for the Toyota Yaris (II)
EngineDocumented faultsRecalls
1.0 / 1.3 / 1.33 VVT-iPetrol33 with conditions5
1.8 TSPetrolFewest documented11 with conditions5
1.4 D-4DDiesel21 with conditions5

According to the data we have, the engine with the fewest documented faults is the 1.8 TS (Petrol).

By fuel type, the one with the fewest documented faults is: Diesel.

We only count the sourced sheets we have. An engine with fewer is not guaranteed to be more reliable: it may have been studied less or sold in smaller numbers.

Official recalls: ask before you pay

A recall existing does not mean this car is affected or that it is still outstanding: it depends on the chassis number, the market and the production date.

  1. Ask the seller for the chassis number (VIN): it has 17 characters, appears in the car's documents and can usually also be seen at the base of the windscreen.
  2. Ask an official Toyota dealer, or the brand's official website if it lets you check by chassis number, whether each recall has been done or is still outstanding for that VIN.
  3. Manufacturer recalls are normally carried out free of charge by the official service network. If one is outstanding, ask for it to be done before you close the sale.
Toyota airbag and seat-belt recalls (2003–2024)Airbags and seat belts

How to check it: Check by VIN whether any of the recalls is outstanding (at the dealer or on the DVSA website) and carry out the inspection or replacement it requires.

View full entry
Toyota steering recalls (2004–2018)Steering

How to check it: Check by VIN whether any of the recalls is outstanding (at the dealer or on the DVSA website) and carry out the inspection or replacement it requires.

View full entry
Toyota wheel, axle and suspension recalls (2004–2026)Suspension and steering

How to check it: Check by VIN whether any of the recalls is outstanding (at the dealer or on the DVSA website) and carry out the inspection or replacement it requires.

View full entry
Toyota engine, transmission and software recalls (2002–2026)Powertrain and engine management

How to check it: Check by VIN whether any of the recalls is outstanding (at the dealer or on the DVSA website) and carry out the inspection or replacement it requires.

View full entry
Toyota electrical, lighting and electronics recalls (2004–2025)Electrical and electronic systems

How to check it: Check by VIN whether any of the recalls is outstanding (at the dealer or on the DVSA website) and carry out the inspection or replacement it requires.

View full entry

On the test drive: what to look and listen for

Taken from each sheet's symptoms and checks. You can tick off what you have already looked at: it is saved only in this browser.

0 of 4 checked

Injection / turbo

  • Look out for: Hard starting, rough idle, smoke and loss of power; noise or vibration from the flywheel when starting and releasing the clutch; oil consumption.

    Ask them to check: Read the codes, run an injector back-leak test and check the EGR. Listen to the flywheel at idle with the clutch released. Measure oil consumption.

Cooling

  • Look out for: Coolant loss with coloured residue next to the pump and rising temperature; a clutch that slips or squeals and hard gear changes earlier than normal.

    Ask them to check: Look for dried coolant residue under the pump and watch the level. Test the clutch pulling away on a hill; if it is replaced, ask for the improved version.

Engine

  • Look out for: The oil level drops between services (more than half a litre per 1,000 km and up to a litre or more), usually from 150,000–200,000 km; bluish smoke.

    Ask them to check: Check the history for oil top-ups or replaced pistons; measure consumption between two changes and check the spark plugs.

Known weak points

  • Look out for: Failing ABS sensors and control unit, seizing rear brakes, clutch release bearing, stiff shifts in 1st–3rd and reverse jumping out; oil leaks from the chain cover; springs, shock absorbers and dipped beams at the roadworthiness test.

    Ask them to check: Check the campaigns by VIN; check rear brakes and ABS; test every gear.

Sources

Every fact on this page comes from these Testigo sheets and their original sources. Sources are not checked in real time.

More Toyota buying guides

View the model pageAll buying guides